FARYUAN 1U PDU | ENGLISH AMAZON COPY | V1
Status: PMC pre-production draft, not submitted to Amazon

TITLE
FARYUAN 1U Rack Mount PDU, 30A 208/240V, 12 Outlets (4 C19 + 8 C13), Dual Current Meters, Two 20A Breakers, NEMA L6-30P Plug, 9.8 ft 10 AWG Cord

FIVE BULLETS
12 OUTLETS IN A 1U LAYOUT
Four C19 and eight C13 outlets support a mix of compatible servers, storage and networking equipment. All output outlets are on one side, with both current meters and bank controls on the other. Designed for horizontal mounting in a 19-inch rack.

READ BOTH BANKS AT A GLANCE
Two local AC current meters show Bank A and Bank B separately. Add the readings to check total load. Use the bank labels to plan your connections and check both readings when adding equipment.

30A INPUT, 24A CONTINUOUS TOTAL
For compatible 208/240V AC equipment on a suitable 30A circuit. Combined continuous load must stay at or below 24A. Two 20A bank breakers do not create a 40A PDU. Follow the final nameplate, outlet and cord limits.

L6-30P CONNECTION AND 10 AWG CABLE
The fixed 9.84 ft (3 m) 10 AWG input cable terminates in a NEMA L6-30P twist-lock plug. Requires a matching, properly installed L6-30R supply receptacle. This PDU does not convert voltage and is not for 120V-only equipment.

LOCAL CONTROL FOR SMALL RACKS
A focused configuration for compatible server, storage and lab equipment where local current visibility matters. View both bank currents at the rack and distribute equipment across the labelled outlets. The two protected banks share one incoming supply.

DESCRIPTION
Bring mixed rack equipment onto one compact distribution point. The FARYUAN 1U PDU design combines four C19 outlets and eight C13 outlets with two local current meters and two 20A bank breakers. Keep the outlet side with your equipment cables and read both banks from the control side. The fixed 3 m 10 AWG cable uses a NEMA L6-30P input. Connect only compatible 208/240V equipment, monitor each bank and keep the combined continuous load at or below 24A. This is one incoming supply split into two monitored banks, not redundant A/B input power.

SEARCH TERMS (DRAFT)
horizontal rackmount power distribution unit iec c13 c19 c14 c20 server cabinet homelab network storage single phase l6 30p amp meter

RELEASE CHECKS
- Match production parts to the user-confirmed 4 C19 + 8 C13 design and confirm the orderable model identifier
- Factory confirms correct 1U mounting height, hole spacing, dimensions and 100 mm internal fit
- Final wiring agrees with Bank A/B labels and meter assignments
- Exact outlet, cable and assembly ratings and approvals verified; do not claim complete-unit UL certification from component evidence
- Production photographs replace factory schematics before marketplace image release
- Confirm packaging contents, carton size, weights, warranty and final Amazon category before listing submission